導入:
We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of レーザー彫刻機‘ uses.
Today we bring the method of 2.5D laser engraving, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.
Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.
基本情報:
ソフトウェア | ライトバーン |
機械 | コムマーカー B4 JPT MOPAファイバーレーザー マーキングマシン |
レーザーモジュールの出力 | 30W |
使用素材 | スレート |
素材情報 | 5mm slate |
時間を作る(分) | 1 時間 |
設定:
加工方法 | 充填 |
プロセス材料 | スレート |
スピード(mm/s) | 400 |
マックスパワー(%) | 100 |
モード | 3D Sliced |
間隔 | 0.04 |
ドット幅 | 0.04 |
命令:
Step1
Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.
Step2
Input the picture.
Step3
Set the parameter.
Step4
Keep patient, and your work will be finished within a few hours.